On-demand webinar57 minutesConstruction

Building Safety Act 2022: a six-week roadmap to compliance

Alison Brannigan explains the Building Safety Act's three gateways and the golden thread, and Paul Stone shows how to digitize the processes that prove compliance, with a live fire safety checklist demo.

What does the Building Safety Act webinar cover?

Building Safety Act 2022: a six-week roadmap to compliance is a 57-minute on-demand webinar from FlowForma, the no-code process automation platform native to Microsoft 365. Alison Brannigan explains the golden thread and the three gateways, and Paul Stone shows how construction firms digitize the processes that evidence compliance. See FlowForma Build Shield.

18 mor seven stories: the buildings the Act applies to
3gateways of compliance
Week 2first BSA process live
Week 6a suite of BSA processes in production

What the audience told us, and the three gateways

A live poll on the biggest challenge in preparing for the Act, and the three gateways a project has to pass.

#1

challenge: reporting on data for compliance

What is your biggest challenge in preparing for the Building Safety Act 2022?

  • Driving adoption of digital technologies
  • The speed at which you can digitalize processes
  • Integrating with other systems
  • Reporting on data for complianceTop answer
“What you need there is a system of record that you can report out of easily.”Paul Stone, FlowForma

Live poll at 01:48

3

gateways to compliance

The three gateways of compliance

  • Gateway 1: planning, with adequate safety controls
  • Gateway 2: before construction, with a mechanism to record changes
  • Gateway 3: completion, with every variation recorded
“It's easier to act now rather than retrospectively trying to fill in the gaps of the golden thread.”Alison Brannigan, FlowForma

From the session, 06:48 to 10:43

Need to evidence BSA compliance?

Book a demo with our process experts and see your Building Safety Act processes digitized on SharePoint, with a full audit trail from the first check to handover.

  • A demo built around one of your processes
  • Your fire safety or BSA process, digitized
  • Advice on evidence for Gateways 2 and 3
  • No cost and no obligation

Working on higher-risk buildings? See FlowForma Build Shield

Pick a time that suits you

00:00

Welcome and speakers

Watch this part

Patrick Naughton00:00

Good morning everyone, and welcome to today's webinar hosted by FlowForma. For anyone new to FlowForma, we provide a leading no-code digital process automation tool that empowers the workforce of construction firms like yours to drive rapid, company-wide digitalization. Today we're covering a highly relevant and time-critical topic: the Building Safety Act 2022, and deploying a six-week digitalization roadmap for compliance.

Patrick Naughton00:40

Let me introduce our two expert speakers, Paul Stone and Alison Brannigan. Alison is territory manager for the construction sector in the UK and an advocate for the transformative impact of digital process automation in construction. She'll give you an overview of the Building Safety Act and the implications of the three gateways of compliance.

Patrick Naughton01:10

Paul is a product strategist with a wealth of experience in the UK construction sector, and our in-house expert on the Building Safety Act. He'll guide you through the steps you need to take to digitize the golden thread of information across the construction lifecycle, and he'll present a real-world fire safety process to show how simple digitalization for the BSA can be.

01:48

Poll: your biggest BSA challenge

Watch this part

Patrick Naughton01:48

Before we get started, I'd like to invite everyone to take part in our poll. What is your biggest challenge in preparing for the Building Safety Act 2022? Driving adoption of digital technologies, the speed at which you can digitalize processes, integrating with other systems or technologies in your ecosystem, or reporting on data for compliance.

Patrick Naughton02:27

Let's have a look at the results. Very interesting: reporting comes out on top, and that's a consistent challenge for most companies.

Paul Stone02:40

Not too surprising that reporting for compliance tops the list. What you need there is a system of record that you can report out of easily, and that's certainly something we'll go through today.

03:05

What the Act covers and why

Watch this part

Alison Brannigan03:10

I want to start with an overview of the Building Safety Act, because a lot of people are wondering exactly what it is, and the legislation is changing quite quickly. The Building Safety Act 2022 is the largest piece of building safety legislation in England and Wales in the last 50 years. Under the updated legislation it applies to new and existing buildings that are 18 meters or seven stories in height.

Alison Brannigan03:46

The Act was introduced to promote safer homes and residential and healthcare buildings. It's being taken seriously at government level, and non-compliance can lead to fines or even imprisonment. Customers tell me they're unsure what will happen next, but it will be enforced, and it's easier to act now rather than retrospectively trying to fill in the gaps of the golden thread.

Alison Brannigan04:36

Why was the Act brought in? Mainly as a response to the tragic Grenfell Tower disaster, which brought a spotlight on building safety, especially in high-rise buildings. The publicity prompted the UK government to review the existing legislation and implement a more rigorous series of building safety regulations.

05:03

Who it applies to, and the golden thread

Watch this part

Alison Brannigan05:03

Who does the BSA apply to? Every stakeholder along the construction lifecycle: architects, contractors, building owners, developers and facilities management. The new duty holders are accountable persons, responsible for the high-rise buildings, and it will be the responsibility of building owners to drive the initiative toward a golden thread of information.

Alison Brannigan05:36

So what exactly is the golden thread? It's a vital part of the Act, and essentially it's a digital audit trail of building safety information across the construction lifecycle. It's as simple as that. A software solution designed for recording information means staff have easily accessible, reliable, up-to-date and accurate information on the building at all times.

Alison Brannigan06:13

The golden thread needs to be created before building work starts and kept updated throughout design and construction. When the work is complete, it's handed over to the accountable person responsible for the occupied building. There's a lot of information to keep track of, so a solution that makes it easy to manage and hand over is key.

06:48

Key dates and Gateway 1

Watch this part

Alison Brannigan06:48

Now some key dates, and how the gateways work. The Act brings in the concept of gateways for compliance, staggering the key dates. Gateway 1 has been in force since January 2023: plans requiring approval must be submitted with adequate safety controls. For the past seven months, our conversations have been about how organizations start the journey, and how to pull information from different systems so it flows seamlessly through the project lifecycle.

07:43

Gateway 2: before construction

Watch this part

Alison Brannigan07:43

Gateway 2 is expected to be enforced in October, so it's looming. It applies to the pre-construction stage: building resources and construction plans must be submitted for approval, and the plans must include the mechanism that will be used to record changes to the approved safety controls. That's really important.

Alison Brannigan08:11

Building work can't commence until Gateway 2 has passed. That has significant impacts on the resources lined up to do the work and on the building owner's or developer's investment. An easy-to-implement solution like FlowForma satisfies this requirement immediately, with minimal disruption and minimal training, so Gateway 2 doesn't need to be an issue.

08:53

Gateway 3: completion

Watch this part

Alison Brannigan08:53

Gateway 3, also applicable from October 2023, focuses on the post-construction stage. Buildings must be approved, including a submission of the as-built building, so you need a clear and concise record of everything you've done through the project. It's one of the most difficult gateways to pass: the builder must have recorded all variations from the approved plans and shown that all checks were implemented.

Alison Brannigan09:35

FlowForma has a full audit trail on the back end, so you can clearly show who has done what and when. A robust audit trail eliminates disputes and gives complete transparency at every stage of the building lifecycle. That's where your golden thread is evident: approved plans, qualified resources, records of completion and every record of change on file, easily accessible in your SharePoint.

Alison Brannigan10:18

Gateway 3 has the largest potential impact if it isn't passed, because it can result in rework, additional costs and delays. And it's not too late: if you need something in place by October, we can absolutely help you.

10:43

Three routes to compliance

Watch this part

Alison Brannigan10:43

People want to know how to go about digitizing, and there are really only three routes we typically see. The first is out-of-the-box technology: complex systems that don't flex and scale the way FlowForma does. The BSA is an evolving law, so an out-of-the-box solution may or may not work, and for a lot of companies it doesn't.

Alison Brannigan11:22

The second is to outsource a consultant to manage all this information. That's a costly, temporary fix that doesn't provide a long-term solution for BSA compliance. The only option that provides the speed, agility and adaptability the Act needs is a fully customizable no-code tool, which empowers your workforce to digitize in under six weeks and future-proofs the business for any future requirements of the legislation.

12:28

A system of record and an audit trail

Watch this part

Paul Stone12:28

Thanks, Alison. Let me frame the solution. Digitizing processes helps you create a system of record that can evidence the fact that you've been compliant with the BSA. Our focus is on digitizing the processes you already have in the workplace, or the ones you're coming up with in response to the BSA. We'll look at fire safety today, but there are many other processes needed to evidence compliance.

Paul Stone13:15

By default the system uses SharePoint to store all the documentation, processes and data automatically, giving you that system of record. But every construction company has many systems in place already, so FlowForma integrates with them and brings together an audit trail that spans all the different systems in your organization.

Paul Stone14:09

It does this by digitizing business processes: people working together, passing information between systems, to achieve a business goal. Normally that's quite a job to digitize, but FlowForma makes it easy, and speed is key to reacting to new legislation. As the BSA changes, you change your processes with it and keep that digital record.

Paul Stone14:52

The history of your processes is the history of your tasks: who did what, when they did it, and the data they captured to evidence the work, including documents, photographs and updated drawings. That's what we mean by an audit trail: an audit of the work that was done, with the data to back up why and how it was completed, in one central store you can use as evidence if you're ever queried on your BSA obligations.

Paul Stone15:55

That audit trail protects you against litigation. And digital processes also guide your workforce to do things right. When you define a process, you define the outputs you need to keep, and the process drives people to carry out the right work at the right time, so the audit trail is a presentable piece of evidence if you're ever called upon.

16:52

The six-week roadmap

Watch this part

Paul Stone16:52

We mentioned speed earlier. Here's what you can expect if you implement FlowForma today. Installation is very easy: it runs on top of SharePoint, so if you have SharePoint it's a matter of clicking a button. You get direct access to a specialist, and we've developed BSA process templates for the common processes people need for compliance, though you can also build your own.

Paul Stone17:41

In week one, you take one of our templates and work with one of our specialists. In week two, your first process goes live. People say that can't be right, but your SharePoint environment is already there, FlowForma installs quickly and the template is ready to go. In parallel, we train you and your colleagues to build out other processes yourselves.

Paul Stone18:35

By week six you have a suite of BSA processes in production, generating that audit trail and performance metrics, just in time for October 2023. It sounds ambitious, but we've proven it time and again with other construction companies. Once it's in place for the BSA, you can use it across your business: many customers have over 50 processes running within 12 months.

19:46

Case study: fire safety checklists

Watch this part

Paul Stone19:46

This case study is a large hospital group with clinics nationwide that wanted to carry out fire safety checklists. Their system used paper or Excel spreadsheets to track things and emails to communicate, which was very inefficient and expensive to run. They chose FlowForma as a quick way to solve the problem, because it's a no-code tool designed for people like construction workers and administrators to build the solutions themselves.

Paul Stone20:55

They replaced the paper and spreadsheets with a digital solution. Paper disappeared, checks were recorded on mobile devices, and the information was collated centrally so the fire safety officer could quickly see any non-conformities. That data also supported better decisions: spotting common traits across fire safety checks and putting procedures in place so those non-conformities don't recur.

Paul Stone22:01

It was really impactful. They saw time savings of over two weeks per year and more value-added work for the managers, and they could measure that because the system tracks how long every task takes.

22:35

Demo: the BSA dashboard in SharePoint

Watch this part

Paul Stone22:35

Let's jump into a demonstration. FlowForma is normally accessed via a web browser, but we also have mobile apps for completing processes on site, with offline access so you can gather data and synchronize later. The system runs inside Microsoft SharePoint, so if you have Microsoft 365 or Teams, SharePoint is there in the background, storing the process information, data and documents.

Paul Stone24:02

That means SharePoint is your system of record. If you also use other systems, Autodesk for example, FlowForma integrates with them in the background, so you can keep your document management system or project database and FlowForma works alongside it. When you log in, you go to a SharePoint site configured as a dashboard, and this one is for the Building Safety Act, with processes that relate to it.

25:29

Demo: the weekly fire safety checklist

Watch this part

Paul Stone25:29

We'll kick off a fire safety checklist with a click. Every process looks like this: the process steps at the top of the screen, with data associated with each step. The first step is a weekly fire safety checklist, typically done in the field, checking a building location against a set of questions.

Paul Stone26:18

The first question: are all corridors, passages and exit routes free of rubbish and obstructions? I'm saying no, because I've noticed a bag in a corridor, so I upload a picture and highlight the bag. On a mobile device you'd just take the picture with the camera. Next: are all fire doors clear? No, there's a wedge in a door, so I upload the evidence and highlight the offending wedge.

Paul Stone27:42

That's what you do in FlowForma: fill in forms. Forms can be pre-populated from back-end systems such as your project management system, so people only enter the minimal detail needed to record the task and upload the evidence. Then they press submit and the process moves to the next step.

28:18

Demo: assigning corrective actions

Watch this part

Paul Stone28:18

The next step, assigning actions, is normally done by the fire safety officer. Everyone has a dashboard showing their current tasks, so the officer sees the job appear, clicks it, and sees only the non-conformities: the bag in the corridor and the wedge in the door. Everything is personalized to the job you're doing right now.

Paul Stone29:14

Now I decide what to do about them and pass them to someone to action, entering each person's name. The system creates two new tasks, one per action owner. At every step it gathers evidence in many formats, images, locations and more, and saves it in the audit trail. It can also send emails and generate documents, such as a PDF to forward to your client, and it stores everything in SharePoint in a structured folder, with your own file naming conventions.

31:13

Demo: audit trail and performance

Watch this part

Paul Stone31:13

In the data store, you can see the fire safety checklists building up, and for each one I can click the audit button to see the detailed audit trail: the evidence of what work was done and who did it. It's filterable, so you can find specific dates or specific resources.

Paul Stone32:20

The audit trail also records performance metrics: who did what and how long it took. It works in real time, so I can see that 12 fire safety checklists are running late, click in and find out why, and see which people are working on them. Over time you can look at each step, identify bottlenecks and make the company more productive.

33:35

Demo: mobile reports and PDF documents

Watch this part

Paul Stone33:35

Here's the mobile interface, using a safety observation report as an example. Whatever you build for desktop is automatically available on mobile, which is one reason it's so fast: you don't build separate apps. The form captures lots of data types, including my GPS location here in Dublin and photos taken with the device.

Paul Stone35:08

All forms work in the same way, which helps adoption. One thing we hear again and again from construction is 'we bought a new system but couldn't get it adopted.' You can include your own help text to guide people in the field, and the forms are responsive: add a corrective action and the form expands for the follow-up action and a signature, and on submit the follow-up becomes the next step.

Paul Stone36:41

The system also generates documents. PDFs are created with Microsoft Word: a plugin merges data from the form into a Word template you create yourself. In construction, lots of people still need a PDF as evidence to send to the client, even after getting rid of paper, so people find this very useful.

37:54

Demo: building a process without code

Watch this part

Paul Stone37:54

Now, how do you build these digital processes? We provide templates, like the weekly fire safety checklist, and a series of construction accelerators covering a wide variety of processes. But once you start, you'll realize you can create your own processes from scratch, quickly and easily, with our no-code configuration tool, the Flow Designer.

Paul Stone39:17

Let me show you. In the fire safety checklist I add a new step, manager approval, and move it so it comes second, before assigning actions. On that step I add a question, 'Do you approve?', with a yes or no answer. There are lots of answer types: file uploads, dates and times you can default and lock as timestamps, digital signatures and more. Save, and it's in the form straight away.

Paul Stone41:06

The BSA doesn't tell you to work this way or that way. It's making sure you gather evidence, the golden thread, that shows what you did. You need a system of record that gathers that evidence flexibly, the way your people work, in one central database you can report on.

42:05

Rules, integrations and files

Watch this part

Paul Stone42:05

Processes also have rules: automated actions in the background. Steps are the tasks people carry out, the data is the evidence, and rules help you get the job done, for example pulling project or timesheet details from a back-end system through one of many integrations, sending targeted emails to clients, suppliers, contractors or colleagues with a call to action, or generating documents as the process runs.

Paul Stone44:46

The system works with every type of file you have: editable Word documents, PDFs, photos, and images of drawings from your back-end systems, which you can mark up to show exactly where a fire safety issue is. It's a very versatile system, more than capable of the work on the BSA, and many people use it for other processes as well.

46:19

Q&A: integrating with other systems

Watch this part

Patrick Naughton46:19

Thank you, Paul, for that demo. We have lots of questions from our audience. First, for Paul: we use multiple technologies in our business. How easy is FlowForma to integrate with other systems?

Paul Stone46:47

We support a wide range of integrations, and with every new customer we analyze the system landscape and how we'd integrate with each system. We integrate with construction and project management systems, directly with databases such as SQL, and with generic applications such as Microsoft Dynamics CRM, using mechanisms including Azure Logic Apps and Power Automate. There are literally hundreds of options, so the best thing is to call us with your specific scenarios.

48:09

Q&A: tracking competencies and qualifications

Watch this part

Patrick Naughton48:09

Another question: can FlowForma track the competencies and qualifications of the resources carrying out tasks?

Paul Stone48:21

Absolutely. Employee and contractor onboarding is one of our most common use cases, across construction and wider, because everybody's approach is slightly different. You can put whatever quality checks you want into those processes, and tie them to specific projects: for this role on this project you need these qualifications, match that to the contractors you're onboarding, highlight any gaps, and have a responsible person approve or address them.

49:33

Q&A: what no-code means

Watch this part

Patrick Naughton49:33

And for Alison: what does no-code mean?

Alison Brannigan49:40

Clients tell me they don't have a development team or anyone with coding experience. Low-code tools are something you still have to configure with technical skills, whereas FlowForma has gone no-code: with the interface Paul demonstrated, anyone can use it once they're trained, no developers or coding experience needed. We work iteratively and hand-hold you, so within four to six weeks you're fully up to speed, and if you want to change something from one week's check-in to the next, we can do it immediately.

51:04

Q&A: images and external contractors

Watch this part

Patrick Naughton51:04

Paul, can you upload multiple images to one task in FlowForma?

Paul Stone51:11

Yes, as many as you like. You can have multiple questions for different types of documents, make them mandatory, and add a review step for someone to check them visually. Suppliers being onboarded can upload documents too, and because FlowForma sits on SharePoint, a document management system, the documents can be controlled in SharePoint afterward.

Patrick Naughton52:06

We need to give external contractors access to our weekly fire checks. Is that possible with FlowForma?

Paul Stone52:20

Absolutely. FlowForma uniquely lets you involve external people, suppliers, clients and contractors, so they can fill in that fire safety checklist without logging in to your internal systems. They can even use their own logins, such as Gmail, and that gets stamped on the audit trail. External access is used widely by our construction customers, for things like contractor timesheets as well.

Alison Brannigan53:15

And it's extremely secure. External access runs separately and has no bearing on your internal system, so there are no safety or security issues.

53:35

Q&A: existing buildings and Asite

Watch this part

Patrick Naughton53:35

Paul, can FlowForma help with retrospective capture of data for existing buildings?

Paul Stone53:43

Absolutely. People come to us with a store of data that isn't in the right format or organization for the BSA, and you can go through a process of realigning that data so it fits your obligations. You can also put digital processes in place so any new works on existing buildings are done in a compliant manner.

Patrick Naughton54:46

A longer one: the golden thread has a lot to do with document management, drawings and product data sheets, and most of the time the client dictates software such as Asite to the subcontractors. How does FlowForma help achieve golden thread compliance then?

Paul Stone55:10

That's an integration question, and Asite is a great example. FlowForma adds workflow and process features Asite doesn't have, and it can save information into Asite and retrieve it. So you can keep using an existing Asite implementation and use FlowForma alongside it: pull the project details into the form, upload your documentation, and save it back to Asite. Asite holds the master set of documents and drawings; the audit trail and work detail live in FlowForma.

56:22

Close

Watch this part

Patrick Naughton56:22

That's all we have time for. Thank you to our two speakers, Alison Brannigan and Paul Stone, for their insights, and thank you all for joining. Look out for the Demystifying the Golden Thread eBook, which is full of further insights, and please complete the survey at the end. I'd highly encourage you to take us up on a free BSA consultation to accelerate your own BSA digitalization plans. Thanks again, everyone.

Frequently asked questions

How easy is FlowForma to integrate with other systems?

FlowForma integrates with construction and project management systems, SQL databases and applications such as Microsoft Dynamics CRM, using mechanisms including Azure Logic Apps and Power Automate. The team analyzes your system landscape and advises on each integration.

Can FlowForma track the competencies and qualifications of resources?

Yes. Employee and contractor onboarding is one of the most common use cases. You can match the qualifications a role needs on a project to the contractors you onboard, highlight gaps and route them for approval.

What does no-code mean?

Anyone can build and change processes once trained, without developers or coding experience. Low-code tools still need technical skills to configure. FlowForma works iteratively with you so you're up to speed in four to six weeks.

Can you upload multiple images to one task?

Yes, as many as you like. You can make uploads mandatory, add a review step, and manage the documents in SharePoint afterward.

Can external contractors complete our weekly fire checks?

Yes. Suppliers, clients and contractors can fill in a checklist without logging in to your internal systems, using their own logins, and their actions are stamped on the audit trail. External access runs separately from your internal system.

Can FlowForma help with retrospective data for existing buildings?

Yes. You can realign existing data to fit your BSA obligations, and put digital processes in place so new works on existing buildings are done in a compliant manner.

How does FlowForma work when the client dictates Asite?

FlowForma integrates with Asite: it pulls project details into forms and saves documents back. Asite keeps the master set of documents and drawings, and FlowForma adds the workflow and the audit trail.

Ready to build your golden thread?

Book a tailored demo, or see how FlowForma Build Shield supports Building Safety Act compliance.